Quality In Performance And Resistance

Functional cement-bonded particleboard which can be useful for construction from base to roof.

Standard Dimensions

Thickness	08, 10, 12, 14, 16, 18, 20, 24, 30 mm 5/16, 25/64, 15/32, 35/64, 5, 5/8, 45/64, 25/32, 15/16, 1 3/16 in.
Weight	10, 13, 16, 18, 20, 23, 26, 30, 38 kg/m2
Dimensions	1250 x 2500 mm (49.7/32 x 98.27/64 in.) 1250 x 2800 mm (49.7/32 x 110.15/64 in.) 1250 x 3000 mm (49.7/32 x 118.7/64 in.)

 

Technical Specifications

Density	1300 ± 50 kg/m3
Fire resistance	(B s1 d0 EN 13501-1)
Thermal Conductivity Coefficient	0,15-0,16 W/mK (10°C dry)
Bending strength perpendicular to the surface	9 N/mm2
Modulus of elasticity with perpendicular bending	4500 N/mm2

 

Advantages of Use

---

• Resistant to external weather conditions.
• Resistant to fire.
• Suitable for use in earthquake resistant steel construction buildings.
• Easy to cut.
• Fast and easy installation.
• Provides a high level of sound and heat insulation.
• Provides a high level of durability against the effects of solar rays.

Interior & Exterior

---

Interior

• Wall cladding system
• Partition wall system
• Under ceramic tiles in wet spaces
• Mezzanine floor system
• Raised access floor system
• Suspended ceiling system

Exterior

• Rebated siding system
• Wall cladding system.
• Soffit and fascia cladding system.
• As bottom sheet for roofing.

Packaging / Storage / Handling

 

 

• Our panels are transported internationally with the plate edges painted with our emblem.
• The panels are on wood pallets covered in plastic with rings and corner brackets added.
• During transport, the panels must be covered in canvas.
• When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
• The panels must be stored in a closed area.
• Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
• If the panel packages are to be stacked caution should be taken to align them.
• If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected by heat and humidity change (stay stable).
• After panels are taken from the package to be used the package should be covered over again with the plastic.
• The storage area must be closed.
• When stacking pallets the pallet feet should be lined up one on top of the other.
• Do not take the plastic cover off until use.
• Do not take off the steel strips until use.
• The materials should be placed on the smoothest ground possible.
• When storing, pallets should be placed on top of each other neatly and the total height of pallets should not be over 3 meters.
• When loading, only two pallets at a time should be loaded.
• When loading makes sure that the pallets are placed on the truck in a balanced way.
• Pallets ready for transport